The HBC-X series closed-loop Hall effect current sensor uses a closed-loop (compensation) principle, providing electrical isolation between the primary and secondary circuits. It accurately measures DC, AC, or pulse currents with a measuring range of 0-50A. The product has a supply voltage of DC ±15V±5%. The epoxy potted housing provides excellent moisture-proof, dust-proof, and insulation protection. It offers high accuracy, excellent linearity, low temperature drift, and high external interference rejection. It features optimised response time, no insertion loss, low power consumption, easy installation, and customisation support. It is widely used in inverters, UPS, photovoltaic current sensing, switching power supplies, variable frequency drives, and various new energy applications.
Features
- Measuring range – 0-50A
- Supply voltage – DC ±15V ±5%
- Measuring principle – closed-loop Hall effect
- Isolation – electrical isolation between primary and secondary
- Potting process – epoxy resin
- Accuracy – high accuracy
- Linearity – excellent
- Measurement type – DC / AC / pulse
Applications
- Inverter applications
- AC/DC variable-speed drive
- Uninterruptible Power Supplies (UPS)
- Switched Mode Power Supplies (SMPS)
- Photovoltaic (PV) current applications
- New Energy Combiner Box Measurement
- Automobile By-wire application
- Electric vehicle charging equipment current sensing
- Household appliance frequency conversion Electromagnetic water heater current measurement
ELECTRICAL DATA:
|
HBC10XA |
HBC20XA |
HBC30XA |
HBC50XA |
|
| Rated input current |
10 |
20 |
30 |
50 |
A |
| Test current range |
20 |
40 |
60 |
100 |
A |
| Turns ratio |
1000 |
1000 |
1500 |
2500 |
T |
| Sec winding resistance |
60 |
60 |
100 |
150 |
Ω |
| Rated output current |
10±0.5% |
20±0.5% |
20±0.5% |
20±0.5% |
mA |
| Supply voltage |
±15±5% |
V |
| Offset current |
≤±0.25 |
mA |
| Offset current Drift |
-40～+85℃ ≤±0.5 |
mA |
| Linearity |
≤±0.2 |
%FS |
| Class |
≤±0.7 |
% |
| di/dt |
＞50 |
A/µS |
| Response time |
＜1 |
µS |
| Bandwidth |
DC～200 |
KHZ |
| Insulation voltage |
2.5 |
KV |
| Operating Temperature |
-40～+85 |
℃ |
| Storage Temperature |
-40～+105 |
℃ |
| Turns |
Turns
ratio
|
Rated input current
IPN[A]
|
Rated output voltage
VOUT[V]
|
Pri DCR[mΩ] |
Pri inductance
[uH]
|
| Single phase |
1 |
±10(±20,±30,±50) |
2.5±0.625 |
0.05 |
0.025 |
|
2 |
±5(±10,±15,±25) |
2.5±0.625 |
0.20 |
0.1 |
|
4 |
±2.5(±5,±7.5,±12.5) |
2.5±0.625 |
1.00 |
0.4 |
| three-phase |
1 |
±10(±20,±30) |
2.5±0.625 |
0.05 |
0.025 |
Notes: Product specifications can be customized
FAQ
Q: What are the advantages of epoxy potting?
A: Epoxy resin potting provides excellent moisture-proof, dust-proof, and insulation protection. It ensures long-term stable operation of the sensor in various harsh environments, enhancing mechanical strength and vibration resistance.
Q: What is the supply voltage of this sensor?
A: The supply voltage is DC ±15V ±5% . The wide voltage range is suitable for various industrial power supply systems, facilitating system integration.
Q: What are the advantages of no insertion loss and low power consumption?
A: No insertion loss ensures the circuit under test is not affected by the sensor, maintaining original circuit efficiency. Low power consumption reduces self-heating of the sensor, improves long-term stability, and reduces system energy consumption.
